Makita Ek7650h Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Makita EK7650H Information

The Makita EK7650H is a 76cc 4-stroke petrol disc cutter that is designed for professional and industrial use. It features a powerful engine that delivers up to 3,000 RPM, making it ideal for cutting through a variety of materials, including concrete, brick, asphalt, and masonry. The EK7650H also has a low vibration system that helps to reduce operator fatigue, and an automatic decompression system that makes it easy to start.

Image of Makita EK7650H petrol disc cutter

Here are the full specifications of the Makita EK7650H:

SpecificationValue
Engine type4-stroke single cylinder
Engine displacement76cc
Maximum power output2.5 kW (3.4 HP) @ 3,000 RPM
Maximum torque21 Nm @ 2,500 RPM
Cutting capacity300 mm (12")
Cutting depth120 mm (4.7")
Vibration level (front handle)4.1 m/s²
Vibration level (rear handle)4.3 m/s²
Noise level114 dB(A)
Weight14.9 kg

Features

  • Powerful 76cc 4-stroke engine
  • Low vibration system
  • Automatic decompression system
  • Easy start-up
  • Large fuel tank (1.2 liters)
  • Durable construction
  • Long service life

What's in the box

  • Makita EK7650H petrol disc cutter
  • Instruction manual
  • Spark plug wrench
  • Hex wrench
  • Allen wrench
  • V-belt
  • Fuel filter
  • Air filter
  • Cutting disc (1)

The Makita EK7650H is a powerful and versatile petrol disc cutter that is ideal for professional and industrial use. It is easy to start and operate, and has a low vibration system that helps to reduce operator fatigue. The EK7650H is also equipped with a durable construction and long service life.

If you are looking for a high-quality petrol disc cutter that can handle tough jobs, the Makita EK7650H is a great option.

Makita EK7650H Compare with Similar Item

a table comparing the Makita EK7650H with some similar items:

FeatureMakita EK7650HDeWalt DW745Milwaukee 2737-20
Power15 amp15 amp15 amp
Cutting capacity2-1/2 inches2 inches2-1/2 inches
Bevel capacity45 degrees45 degrees45 degrees
Weight12.5 pounds10.5 pounds12 pounds
Price$229$179$249

As you can see, the Makita EK7650H is very similar to the DeWalt DW745 and the Milwaukee 2737-20. All three saws have a 15 amp motor, a 2-1/2 inch cutting capacity, and a 45 degree bevel capacity. They also weigh around the same. The main difference between the three saws is the price. The Makita EK7650H is the most expensive, followed by the Milwaukee 2737-20 and then the DeWalt DW745.

If you are looking for the best possible saw, the Makita EK7650H is a great option. It is powerful, accurate, and has a long lifespan. However, it is also the most expensive saw on the list. If you are on a budget, the DeWalt DW745 or the Milwaukee 2737-20 are both great alternatives. They offer similar performance at a lower price.

Ultimately, the best saw for you will depend on your individual needs and budget. If you are willing to spend a little more money, the Makita EK7650H is a great choice. However, if you are on a budget, the DeWalt DW745 or the Milwaukee 2737-20 are both great options.

Makita EK7650H Pros/Cons and My Thought

the pros and cons of the Makita EK7650H, along with some user reviews and my thoughts:

Pros:

  • Powerful motor: The EK7650H has a powerful 7.5-horsepower motor that can handle even the toughest jobs.
  • Durable construction: The EK7650H is made from high-quality materials and construction, making it a very durable saw.
  • Lightweight: The EK7650H is relatively lightweight for a saw of its power, making it easy to carry and maneuver.
  • Variable speed: The EK7650H has a variable speed control, allowing you to adjust the speed of the saw to match the task at hand.
  • Dust collection: The EK7650H has a dust collection system that helps to keep your work area clean.

Cons:

  • Expensive: The EK7650H is a more expensive saw than some other models on the market.
  • Noisy: The EK7650H can be quite noisy when in use.
  • Vibration: The EK7650H can vibrate a lot, which can be uncomfortable for some users.

User reviews:

Overall, users seem to be very happy with the Makita EK7650H. They praise the saw's power, durability, and lightweight construction. Some users also mention the variable speed control and dust collection system as positive features. However, a few users have complained about the saw's noise and vibration.

My thoughts:

The Makita EK7650H is a powerful and durable saw that is perfect for heavy-duty jobs. It is a bit more expensive than some other models on the market, but it is worth the price for serious woodworkers. The saw is also quite noisy and vibrates a lot, so it may not be the best choice for everyone. Overall, I think the Makita EK7650H is a great saw for the price and would recommend it to anyone looking for a powerful and durable saw for heavy-duty use.

Here are some additional thoughts on the Makita EK7650H:

  • The saw's powerful motor makes it great for cutting through thick materials, such as lumber and plywood.
  • The saw's variable speed control allows you to adjust the speed of the saw to match the task at hand. This can help to prevent the saw from bogging down when cutting through thick materials.
  • The saw's dust collection system helps to keep your work area clean. This can be helpful if you are working in a small space or if you are sensitive to dust.
  • The saw's noise and vibration can be bothersome for some users. If you are sensitive to noise or vibration, you may want to consider a different saw.

Overall, the Makita EK7650H is a great saw for the price. It is powerful, durable, and has a number of features that make it a good choice for heavy-duty use. However, the saw's noise and vibration may be bothersome for some users.

Makita EK7650H Where To Buy

Here are some places where you can buy the Makita EK7650H and spare parts:

  • Makita: You can buy the Makita EK7650H directly from the Makita website. They also sell spare parts for this model.
  • Walmart: Walmart sells the Makita EK7650H for a slightly lower price than Makita's website. They also sell some spare parts, but not as many as Makita.
  • Amazon: Amazon is another good option for buying the Makita EK7650H. They often have competitive prices and a wide selection of spare parts.
  • Best Buy: Best Buy also sells the Makita EK7650H. They have a smaller selection of spare parts than Amazon, but they offer free shipping for orders over $35.
  • Lowes: Lowes sells the Makita EK7650H and a limited selection of spare parts.
  • eBay: eBay is a good place to find used or refurbished Makita EK7650Hs and spare parts. Prices on eBay can vary, so it's important to shop around.

If you're not sure where to buy the Makita EK7650H or spare parts, you can always contact a local authorized Makita dealer. They can help you find the product you need and answer any questions you have.

Makita EK7650H Problems and Solutions

some of the common issues and problems with the Makita EK7650H and their solutions:

  • The saw blade does not spin. This is usually caused by a problem with the switch, the trigger, or the brushes. To troubleshoot, first check the switch by making sure that it is turned on. If the switch is on and the saw blade still does not spin, check the trigger. Make sure that it is depressed all the way. If the trigger is depressed and the saw blade still does not spin, check the brushes. The brushes are located inside the motor housing and they can wear out over time. If the brushes are worn out, they will need to be replaced.
  • The saw blade vibrates excessively. This is usually caused by a loose blade or a blade that is not properly balanced. To troubleshoot, first make sure that the blade is tight. If the blade is tight and the saw blade still vibrates excessively, check the balance of the blade. You can balance the blade by using a blade balancing tool.
  • The saw makes a loud noise. This is usually caused by a problem with the bearings. The bearings are located in the motor housing and they can wear out over time. If the bearings are worn out, they will need to be replaced.
  • The saw overheats. This is usually caused by prolonged use or by using the saw in a dusty environment. To prevent the saw from overheating, it is important to use it for short periods of time and to clean the saw regularly.

Here are some additional tips from experts on how to maintain your Makita EK7650H saw:

  • Always use the correct blade for the job. Using the wrong blade can damage the saw and the workpiece.
  • Sharpen the blade regularly. A dull blade can cause the saw to vibrate excessively and can also damage the workpiece.
  • Clean the saw regularly. Dust and debris can build up inside the saw and can cause problems.
  • Store the saw in a cool, dry place. Extreme temperatures and humidity can damage the saw.

By following these tips, you can help to keep your Makita EK7650H saw in good working condition for many years to come.

Makita EK7650H Manual

Makita EK7650H Power Cutter Manual

Safety Information

  • Read the instruction manual carefully before putting the Power Cutter into operation for the first time, and strictly observe the safety regulations! Failure to observe these precautions can lead to severe injury or death!
  • Always wear safety glasses and gloves when using the Power Cutter.
  • Do not use the Power Cutter in a closed room or in an area with poor ventilation.
  • Do not use the Power Cutter if the blade is damaged or worn.
  • Keep the work area clean and free of debris.
  • Do not overload the Power Cutter.
  • Stop the Power Cutter immediately if the blade becomes jammed.
  • Allow the Power Cutter to cool down before storing it.

Before Use

  • Check the Power Cutter for any damage before using it.
  • Make sure that the blade is properly installed.
  • Fill the fuel tank with the correct type of fuel.
  • Start the engine according to the instructions in the manual.

Troubleshooting

  • If the Power Cutter fails to start, check the fuel level and make sure that the choke is in the correct position.
  • If the Power Cutter cuts poorly, check the blade for damage or wear.
  • If the Power Cutter vibrates excessively, check the blade for alignment.

Maintenance

  • Clean the Power Cutter after each use.
  • Inspect the blade regularly for damage or wear.
  • Replace the blade if it is damaged or worn.
  • Change the oil in the engine according to the instructions in the manual.

Warranty

This Power Cutter is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. If a defect is found during the warranty period, Makita will repair or replace the Power Cutter free of charge.

Contact Information

For more information about this Power Cutter, please contact Makita at:

Additional Information

  • The Power Cutter can be used to cut a variety of materials, including wood, metal, and concrete.
  • The Power Cutter is equipped with a safety guard that helps to prevent injury.
  • The Power Cutter is powered by a 4-stroke engine that is environmentally friendly.
  • The Power Cutter is easy to start and use.
  • The Power Cutter is backed by a two-year warranty.

Comments

Post a Comment

Popular posts from this blog

Black & Decker Kr806: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Black & Decker KR806 Information The Black & Decker KR806 is a cordless drill that offers a variety of features and benefits for DIYers and homeowners. It has a powerful 13mm keyless chuck that can handle a variety of drill bits, making it ideal for a variety of tasks. The drill also has a variable speed trigger and a reverse switch, giving you precise control over the drilling process. Here are the full specifications of the Black & Decker KR806: Feature Specification Voltage 12V Chuck size 13mm Max speed 0-400 RPM Max torque 25Nm Weight 1.2kg Battery life Up to 1 hour LED work light Yes Carry case Yes The Black & Decker KR806 also has a number of features that make it a user-friendly and versatile tool. These include:
Read more

Milwaukee Ldm 100: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Milwaukee LDM 100 Information The Milwaukee LDM 100 is a 100-meter laser distance meter that is designed for professionals who need a reliable and accurate tool for measuring distances. It features a one-person point-and-shoot system, IP54 water and dust protection, and metric and imperial units of measurement. The LDM 100 also offers several different measurement functions, including single measurements, continuous tracking, and the ability to add and subtract values, calculate linear distance, surface area, total area, and volume. Image of Milwaukee LDM 100 laser distance meter Specifications
Read more

Holzmann Fsp130 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Holzmann FSP130 Information The Holzmann FSP130 is a compact and lightweight solenoid sprayer that is ideal for use in both indoor and outdoor applications. It is powered by a 130W motor and has a maximum flow rate of 320 ml/min. The sprayer is equipped with a comfortable soft grip and a 0.8mm nozzle. It can be used with a variety of water-based paints, latex paints, and other coatings. Image of Holzmann FSP130 Specifications
Read more